Doepfer A-160-1 Clock Divider 1
CHF 69
En stock
Payer facilement avec :
Doepfer A-160-1 Clock Divider 1
The A-160-1 is a frequency divider for clock, trigger and gate signals, designed to be a source of lower frequencies, particularly for rhythmical uses. The available dividers are exclusively even numbers. Additionaly there is a reset input which sets all outputs to « zero ».
DetailsThe clock divider analyses an incoming clock and divides it by 2, 4, 8, 16, 32 and 64. Each divisor has a separate gate output and their activities are displayed with individual LEDs.A trigger impulse at the reset input zeroes the entire module.miscellaneousThe A-160-1 is expandable by the A-161 Clock SequencerconnectorsTrigger input, reset input, six divider outputsdimensions3U Eurorack module, 4HP wide, 40mm deepCurrent draw: 40mA at 12V and 0mA at -12V
Vous avez des questions
Warranty Policy
Reliable support long after you buy.
Secure Payment
VISA, Mastercard and Apple Pay.
Produits qui pourraient vous intéresser :
-
E-RM Midiclock+
Le midiclock construit par E-RM Erfindungsbüro est une solution professionnelle de masterclock qui améliore considérablement la synchronisation des systèmes MIDI, DIN-sync et modulaires.
CHF 209Sur commande -
FRAP TOOLS Bagài
Un module qui est à la fois un burst d’horloge, un S&H, un bitcrush audio, ou un générateur de tension aléatoire fluctuante est en effet un peu difficile à décrire en un seul mot.
CHF 279Sur commande -
Shakmat Modular – Clock O’Pawn
Shakmat Modular – Clock O’Pawn Clock O’Pawn focuses on one thing and does it very well: generation of clock signals. Externally synchronized via Gate/Trigger or MIDI. Internally set through a potentiometer or tapped in via an extra button. Two additional buttons let the clock start / pause (no reset) or fully stop. And there are…
CHF 159Sur commande
