The Zeroscope 1U is an adaptation of the excellent 3U Zeroscope by VPME.DE.
Three Modes Packed Into 1U
Scope — Standard graphical display, with time displayed on the X-axis and voltage displayed on the Y-axis.
X-Y — Alternate graphical display with CH 1 driving the X-axis and CH 2 driving the Y-axis.
Tune — Alphanumerical tuning display, which you can configure to show either Hz values or note names.
The Scope displays have adjustable display offset for each channel and an adjustable trigger threshold, while the tuner has options for reference pitch and average update speed.
Ins & Outs
The inputs are DC coupled and accept signals between -10V and 10V. The Signal on the input is normalled to the output below; this allows you to monitor or tune a signal without a mult or re-patching.
Reliable support long after you buy.
VISA, Mastercard and Apple Pay.
Caractéristiques Atténuateur/atténuateur/mixeur actif/tamponné avec signaux externes. Chaque sortie est normalisée pour se mélanger au canal adjacent à droite, ce qui permet de réaliser des sous-mixages par groupes de 2, 3 ou des quatre canaux. 2 modes pour chaque canal (unipolaire et bipolaire). 5v normalisé à chaque entrée.
Panneau de jacks TRS 1/4″ pour le module Stereo Line Out 1U Une autre paire de jacks Si vous ne possédez pas de boîtier Intellijel avec des prises ¼ » compatibles intégrées, vous devez acheter un module Stéréo Out Jacks 1U, qui se connecte via un câble ruban au module Stéréo Line Out 1U pour fournir…
Module VCA compact à 2 canaux courbe caractéristique linéaire convient pour les signaux audio et la tension de commande LEDs pour l’affichage du niveau de la CV Entrée A normalisée sur l’entrée B CV-In A normalisé sur CV-In B Sortie A normalisée sur sortie B (fonction mixer) Doublement de la tension possible via la sortie…
Atténuateur à deux canaux, inverseur, multiplicateur, atténuateur, mélangeur et source de tension continue Consommation de courant : 12mA (+12V) / 10mA (-12V) largeur : 14 profondeur : 22 mm